JVC SR-VD400US Instruction Manual - Page 20
INITIAL SETTINGS cont., Enter DBS Receiver's brand, Engage test mode, Return to normal screen
View all JVC SR-VD400US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 EN VCR CABLE TV /DBS INITIAL SETTINGS (cont.) 5 Enter DBS Receiver's brand Press %fi to move the arrow to "BRAND". Press @ # to enter the brand code from the following list. FUNCTION SET UP TUNER SET UP DBS SET UP INITIAL SET UP INPUT CH OFF BRAND 40 TEST MODE MENU EXIT OK SELECT WITH ARROW KEYS SELECT THEN PRESS [OK] BRAND JVC (DISH Network) ECHOSTAR (DISH Network) SONY (DSS) RCA (DSS) CODE 51 51 41 40 7 5 6 NOTES: ● The Controller may not work with all types of DBS receiver. ● If your DBS receiver does not respond to the code, you cannot use the Controller to change satellite channels. In this case, make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording. In addition, if your DBS receiver is equipped with a timer, you can also use "Satellite Auto Recording" (੬ pg. 64). ● The VCR can only change the satellite channel through the Controller during timer recording. ● If your DBS receiver cannot be operated with a Remote (because it has no remote sensor), you cannot use the Controller to change its channels. Make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording. ● For customers in U.S.A.: If you are unable to set the Controller, contact JVC toll free at 1-800-252-5722. 6 Engage test mode Press %fi to move the arrow to "TEST MODE", then press OK. The program currently received through the DBS receiver appears for about 10 seconds. NOTE: If you do not engage the test mode in step 6, "INPUT CH" and "BRAND" are not set. ● If the DBS receiver's channel changes to 205, setting is complete Press @ # to move FUNCTION SET UP TUNER SET UP INITIAL SET UP the arrow to "YES", DBS SET UP then press OK and INPUT CH OFF "DBS RECEIVER DID YOUR DBS RECEIVER CHANGE TO CHANNEL 205? CONTROL IS ON" YES NO appears on the screen for about 5 MENU EXIT OK SELECT WITH ARROW KEYS SELECT THEN PRESS [OK] seconds. ● If the DBS receiver's channel does not change as shown above 1 Press @ # to move the arrow to "NO". 2 Press OK. 3 Re-enter the correct code. 7 Return to normal screen Press MENU.