Konica Minolta AccurioPress C14000 Watkiss PowerSquare R2L User Manual - Page 100
Install New Stitch-wire, Introduction, Stitch-wire Description, Before You Begin
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
6 - Maintenance - Install New Stitch-wire Install New Stitch-wire Introduction Only use stitch-wire that is approved by your supplier. Stitch-wire that is not approved by your supplier can cause bad performance and cancels the warranty. Stitch-wire Description • • Before You Begin Lift the PowerSquare main deck. See "Lift the PowerSquare Main Deck" on page 25. Remove the Stitch-wire from the Stitch Head Stitch-wire Guide Block Stitch-wire Felt wire-cleaning pads FIGURE 52. Stitch-wire Guide Block Step 1 Action Cut the stitch-wire to the right of the stitch-wire guide block. Information Cut here 2 Pull the stitch-wire from the stitch- wire guide block. 3 Fit a new stitch-wire spool. See "Fit a New Stitch-wire Spool" on page 97. 96 Watkiss PowerSquare™224 User Manual