Konica Minolta AccurioPress C14000 Watkiss PowerSquare R2L User Manual - Page 67
machine. Touch START, TOUCH PAD ERROR
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
5 - Error Conditions, Problems and Solutions - Message List Message STITCH TIMEOUT SYSTEM ERROR 00.20 40.21 40.22 42.xx 43.xx SYSTEM ERROR 39.xx TAMPER - No comms TOO MANY PAGES TOUCH PAD ERROR Touch START to clear machine Trim axis moving Information Reference Press STOP . Open the folder cover, remove the paper, close the folder cover. Touch STOP to clear the message from the screen. If the message does not clear, use the mains ON/ OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. Press the reset button on the stacker. If the message does not clear, use the stacker mains ON/ OFF switch. Turn the stacker OFF, then turn the stacker ON. If the problem continues, then call your service engineer. Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer The printer has delivered too many sheets into the gathering area. Remove the incorrect set. Touch STOP to clear the message from the screen. Check the settings for SET THICKNESS or SHEET THICKNESS. There is a fault with the START and STOP touch pads. If the problem continues, then call your Watkiss service engineer. There may be some paper in the machine. Touch START to clear the machine before you start a new job. The trim axis (size adjustment) is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. Watkiss PowerSquare™224 User Manual 63