Konica Minolta AccurioPress C14000 Watkiss PowerSquare R2L User Manual - Page 66
Shuttle Not, Stacker Full
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference SHUTTLE - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. SHUTTLE NOT PARKED The shuttle is in the wrong position. Touch START, then follow the instructions on the screen. Sidelay axis moving The sidelay axis (size adjustment) is adjusting. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. SIDELAY - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. STACKER FULL The stacker is full. Unload the books from the stacker. STACKER - No comms Check that the stacker power input is connected. Check that the stacker mains ON/ OFF switch is ON. If the problem continues, then call your service engineer. Stitch axis moving The stitch axis is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. Stitch length will change The stitch length cannot adjust at soon the moment. The stitch leg length will adjust after the next book. STITCH - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. Stitch position adjusting The stitch position is adjusting. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. 62 Watkiss PowerSquare™224 User Manual