Konica Minolta AccurioPress C14000 Watkiss PowerSquare R2L User Manual - Page 61

Flow Error - For, Error In Trim Area

Get Konica Minolta AccurioPress C14000 PDF manuals and user guides View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

5 - Error Conditions, Problems and Solutions - Message List Message Information Reference DRIVE MOTOR STALL There is a paper jam. Check the machine and correct the error. See "Paper Jams" on page 65. Touch STOP to clear the message from the screen. Endlay axis moving The endlay axis (size adjustment) is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. ENDLAY - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. ERROR IN TRIM AREA There is an error at the trimmer. Check the trimmer for a paper or book jam. See "Jam in the Trim Area" on page 70. Touch STOP to clear the message from the screen. ERROR - No Comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. FLOW ERROR BRIDGE There is an error at the connecting bridge. Open the connecting bridge cover and check for a paper jam. See "Jam in the Connecting Bridge" on page 65. Touch STOP to clear the message from the screen. FLOW ERROR - FORMER There is an error at the former. Open the folder cover and remove the book. If necessary, open the main deck to remove the book. See "Jam in the Folder or Former Area" on page 67. FLOW ERROR GATHER AREA There is a paper jam in the gather- See "Jam in the ing area. Open the gathering area Gathering Area" and remove the paper jam. on page 66. FLOW ERROR - OUTFEED There is an error at the outfeed. Remove the trim bin and open the trim stop guard to remove the book. See "Jam in the Trim Area" on page 70. If necessary, open the main deck to remove the book. Watkiss PowerSquare™224 User Manual 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
5 - Error Conditions, Problems and Solutions - Message List
Watkiss PowerSquare™224 User Manual
57
DRIVE MOTOR STALL
There is a paper jam. Check the
machine and correct the error.
Touch STOP
to clear the mes-
sage from the screen.
See “Paper Jams”
on page 65.
Endlay axis moving
The endlay axis (size adjustment)
is moving. This message clears
when the adjustment is complete.
If the message does not clear,
touch
ADVANCED
>
RE-REF
.
ENDLAY - No comms
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON.
If the problem
continues, then call your service
engineer.
ERROR IN TRIM AREA
There is an error at the trimmer.
Check the trimmer for a paper or
book jam.
Touch STOP
to clear the mes-
sage from the screen.
See “Jam in the
Trim Area” on
page 70.
ERROR - No Comms
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON.
If the problem
continues, then call your service
engineer.
FLOW ERROR -
BRIDGE
There is an error at the connecting
bridge.
Open the connecting
bridge cover and check for a paper
jam.
Touch STOP
to clear the mes-
sage from the screen.
See “Jam in the
Connecting
Bridge” on
page 65.
FLOW ERROR - FOR-
MER
There is an error at the former.
Open the folder cover and remove
the book.
If necessary, open the
main deck to remove the book.
See “Jam in the
Folder or Former
Area” on page 67.
FLOW ERROR -
GATHER AREA
There is a paper jam in the gather-
ing area.
Open the gathering area
and remove the paper jam.
See “Jam in the
Gathering Area”
on page 66.
FLOW ERROR - OUT-
FEED
There is an error at the outfeed.
Remove the trim bin and open the
trim stop guard to remove the
book.
If necessary, open the main deck
to remove the book.
See “Jam in the
Trim Area” on
page 70.
Message
Information
Reference