Konica Minolta AccurioPress C14000 Watkiss PowerSquare R2L User Manual - Page 65

REMOVE SET - GATH, Stitch Area

Get Konica Minolta AccurioPress C14000 PDF manuals and user guides View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

5 - Error Conditions, Problems and Solutions - Message List Message Information Reference REMOVE SET - GATHERING AREA REMOVE SET STITCH AREA Rotate axis moving ROTATE - No comms SET IN GATHERING AREA Shuttle axis moving SHUTTLE MOTOR COMMS FAIL SHUTTLE MOTOR ERROR Open the gathering area and remove the sheets. Open the folder cover and remove the set. The rotate axis is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. There is a set or partial set in the gathering area. Open the gathering area and remove the sheets. If the print job has been cancelled, open the gathering area and remove the sheets. Or touch START > ADVANCED > PURGE SET > PURGE SET to clear the set from the machine. The shuttle axis is adjusting. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. See "Jam in the Gathering Area" on page 66. See "Jam in the Stitch Area" on page 67. Watkiss PowerSquare™224 User Manual 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
5 - Error Conditions, Problems and Solutions - Message List
Watkiss PowerSquare™224 User Manual
61
REMOVE SET - GATH-
ERING AREA
Open the gathering area and
remove the sheets.
See “Jam in the
Gathering Area”
on page 66.
REMOVE SET -
STITCH AREA
Open the folder cover and remove
the set.
See “Jam in the
Stitch Area” on
page 67.
Rotate axis moving
The rotate axis is moving. This
message clears when the adjust-
ment is complete.
If the message does not clear,
touch
ADVANCED
>
RE-REF
.
ROTATE - No comms
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON.
If the problem
continues, then call your service
engineer.
SET IN GATHERING
AREA
There is a set or partial set in the
gathering area.
Open the gathering area and
remove the sheets.
If the print job has been cancelled,
open the gathering area and
remove the sheets.
Or touch
START
>
ADVANCED
>
PURGE
SET
>
PURGE SET
to clear the set from
the machine.
Shuttle axis moving
The shuttle axis is adjusting. This
message clears when the adjust-
ment is complete.
If the message does not clear,
touch
ADVANCED
>
RE-REF
.
SHUTTLE MOTOR
COMMS FAIL
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON.
If the problem
continues, then call your service
engineer.
SHUTTLE MOTOR
ERROR
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON.
If the problem
continues, then call your service
engineer.
Message
Information
Reference