Konica Minolta AccurioPress C14000 Watkiss PowerSquare R2L User Manual - Page 62
FORM ROLLER NOT, Folder or Former
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference FLOW ERROR STITCHER There is an error at the stitcher. See "Jam in the Open the folder cover and remove Stitch Area" on the book. page 67. If the problem continues, then call your service engineer. Fold blade axis moving The fold blade axis (book thickness adjustment) is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. FOLD BLADE NOT PARKED Open the folder cover, remove the paper, close the folder cover. Touch START , then follow the instructions on the screen. FOLD - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. FORM CLAMP CLOSED The form clamp is in the wrong position. Touch START to reset the position. Follow the instructions on the screen. FORM ROLLER ERROR Open the folder cover, remove the See "Jam in the paper, close the folder cover. Folder or Former Area" on page 67. FORM ROLLER NOT PARKED The form roller is in the wrong position. Touch START to reset the position. Follow the instructions on the screen. FORM CLAMP ERROR There is an error at the former. Open the folder cover and remove the book. If necessary, open the main deck to remove the book. See "Jam in the Folder or Former Area" on page 67. GATHERING AREA COVER OPEN Close the gathering area cover if you need to operate the machine online. 58 Watkiss PowerSquare™224 User Manual