Konica Minolta AccurioPress C14000 Watkiss PowerSquare R2L User Manual - Page 93

See Lift the PowerSquare Main, Close the PowerSquare.

Get Konica Minolta AccurioPress C14000 PDF manuals and user guides View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

6 - Maintenance - Clean the Trimmings-removal Fingers Procedure Step 1 2 3 4 Action Information Lift the PowerSquare main deck. See "Lift the PowerSquare Main Deck" on page 32. Remove the trim bin. Clean the four visible trimmingsremoval fingers with an alcohol wipe. The procedure can be seen from the top of the machine. Access to the parts is through the former-clamp mechanism. See Figure 45. Wear protective gloves when you use the alcohol wipe. Rotate the conveyor shaft by half a turn. 1. Hold the shaft and push to the right, against spring pressure, to disengage the shaft from the drive pin.    2. Rotate the shaft by half a turn. 3. Align the shaft with the drive pin and release. 5 Clean the four visible trimmings- Wear protective gloves when you removal fingers with an alcohol use the alcohol wipe. wipe. 6 Fit the trim bin. 7 Close the PowerSquare. Watkiss PowerSquare™224 User Manual 89

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
6 - Maintenance - Clean the Trimmings-removal Fingers
Watkiss PowerSquare™224 User Manual
89
Procedure
Step
Action
Information
1
Lift the PowerSquare main deck.
See “Lift the PowerSquare Main
Deck” on page 32.
2
Remove the trim bin.
3
Clean the four visible trimmings-
removal fingers with an alcohol
wipe.
The procedure can be seen from
the top of the machine.
Access to the parts is through the
former-clamp mechanism. See
Figure 45.
Wear protective gloves when you
use the alcohol wipe.
4
Rotate the conveyor shaft by half a
turn.
1. Hold the shaft and push to the
right, against spring pressure, to
disengage the shaft from the drive
pin.
2. Rotate the shaft by half a turn.
3. Align the shaft with the drive pin
and release.
5
Clean the four visible trimmings-
removal fingers with an alcohol
wipe.
Wear protective gloves when you
use the alcohol wipe.
6
Fit the trim bin.
7
Close the PowerSquare.