Konica Minolta AccurioPress C14000 Watkiss PowerSquare R2L User Manual - Page 95
Lubricate the Stitch Head, When to do, Materials needed, CAUTION, Initial Procedure
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
6 - Maintenance - Lubricate the Stitch Head Lubricate the Stitch Head When to do • When the message OPERATOR MAINTENANCE is displayed on the screen. • When a new stitch-wire is installed if this interval is shorter. Materials needed • Klüber Isoflex NBU15 Grease, 50g • Air duster CAUTION : Only use the grease shown in this manual. Correct lubrication extends the performance and service life of the stitch head. Other types of grease do not protect the stitch head. Only apply the grease as shown. If you apply additional grease, the paper gets marked. Initial Procedure FIGURE 48. Trim the nozzle of the tube of grease Step 1 Action Trim the first 2.5mm from the nozzle. Information See Figure 48 on page 91 2 Remove the cap from the tube of grease. 3 Fit the nozzle to the tube of grease. Watkiss PowerSquare™224 User Manual 91