Konica Minolta AccurioPress C14000 Watkiss PowerSquare R2L User Manual - Page 72
Jam before the Trimmer
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
5 - Error Conditions, Problems and Solutions - Paper Jams Jam before the Trimmer The error message JAM BEFORE TRIMMER is displayed. This error can be • a book jammed before the trimmer • a piece of paper trimming has covered the jam sensor Trimmer Infeed Conveyor Former-clamp mechanism FIGURE 29. Trimmer Infeed Conveyor viewed from above Reach in here to access the trim-infeed conveyor Former clamp - look in here for paper trimmings Former clamp mechanism. FIGURE 30. Access to the Trimmer Infeed Conveyor Step Action 1 Open the PowerSquare main deck. 2 Remove the trim bin. Information See "Lift the PowerSquare Main Deck" on page 32 68 Watkiss PowerSquare™224 User Manual
5 - Error Conditions, Problems and Solutions - Paper Jams
68
Watkiss PowerSquare™224 User Manual
Jam before the Trimmer
The error message
JAM BEFORE TRIMMER
is displayed. This error can be
•
a book jammed before the trimmer
•
a piece of paper trimming has covered the jam sensor
Trimmer Infeed Conveyor
FIGURE 29.
Trimmer Infeed Conveyor viewed from above
Former-clamp mechanism
Reach in here to access the trim-infeed
conveyor
Former clamp mechanism.
FIGURE 30.
Access to the Trimmer Infeed Conveyor
Former clamp - look in here for paper
trimmings
Step
Action
Information
1
Open the PowerSquare
main deck.
See “Lift the PowerSquare Main Deck” on
page 32
2
Remove the trim bin.