Konica Minolta C83hc High Chroma AccurioPress C6100/C6085 AccurioPress C3080/C - Page 64

Procedure (Decoding), Press [Auto Inspection], set [Inspection Setting] to [ON]

Get Konica Minolta C83hc High Chroma PDF manuals and user guides View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

7.3 Decoding the Barcode Area or Serial No. (0-9) Area to Check the Contents 7 8 When you want to set two or more inspection areas, select [No.2] and subsequent numbers in the menu list of No. Then, execute steps 6 and 7 again. % You can set up to 30 inspection areas in each of [Front Side] and [Back Side]. % To delete the setting, select the No. you want to delete, and press [Delete]. % If you want to change an area other than the specified inspection area, set [Inspection Excluding Area]. For details on the procedure, refer to "6.2. Setting an Inspection Area" in this manual. 9 Press [Complete]. Procedure (Decoding) 1 Hold the print job including all the repeated parts on this machine. TU OE SE             2 Press [JOB LIST] on the [MACHINE] screen to display the [Hold Job] screen. 3 Select the print job held in step 1, and press [Job Ticket]. The [Job Ticket Edit] screen is displayed. 4 Press [Auto Inspection], set [Inspection Setting] to [ON], enable [Use Registered Image] in [Reference Image Setting], and select the reference image created in "Procedure (Setting an Inspection Area)". % For details on the procedure, refer to "3.2. Selecting the Created Reference Image for Automatic Inspection" in this manual. 5 Press [Output]. 6 Press [Normal] in [Output Method], and press [OK]. Printing starts, and data in the inspection area is decoded from the print image. % You can check the decoding result (CSV file) in the automatic inspection report. Automatic Inspection Operation Manual 7-12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
7.3
Decoding the Barcode Area or Serial No. (0-9) Area to Check the Contents
7
Automatic Inspection Operation Manual
7-12
8
When you want to set two or more inspection areas, select [No.2] and subsequent numbers in the menu
list of No. Then, execute steps 6 and 7 again.
%
You can set up to 30 inspection areas in each of [Front Side] and [Back Side].
%
To delete the setting, select the No. you want to delete, and press [Delete].
%
If you want to change an area other than the specified inspection area, set [Inspection Excluding
Area]. For details on the procedure, refer to "6.2. Setting an Inspection Area" in this manual.
9
Press [Complete].
Procedure (Decoding)
1
Hold the print job including all the repeated parts on this machine.
2
Press [JOB LIST] on the [MACHINE] screen to display the [Hold Job] screen.
3
Select the print job held in step 1, and press [Job Ticket].
The [Job Ticket Edit] screen is displayed.
4
Press [Auto Inspection], set [Inspection Setting] to [ON], enable [Use Registered Image] in [Reference
Image Setting], and select the reference image created in "Procedure (Setting an Inspection Area)".
%
For details on the procedure, refer to "3.2. Selecting the Created Reference Image for Automatic
Inspection" in this manual.
5
Press [Output].
6
Press [Normal] in [Output Method], and press [OK].
Printing starts, and data in the inspection area is decoded from the print image.
%
You can check the decoding result (CSV file) in the automatic inspection report.
1
2
3
4
5
6
7
8
9
10
11
12
1st
2nd
3rd