Konica Minolta Fujitsu ScanSnap S1300i Operation Guide - Page 27
Mac OS
View all Konica Minolta Fujitsu ScanSnap S1300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
System Requirements ■ Mac OS Operating system (*1) Mac OS X v10.7 Mac OS X v10.6 Mac OS X v10.5 CPU Memory Intel® Core™ Duo 1.83 GHz or higher (Recommended: Intel® Core™2 Duo 2.4 GHz or higher) 2 GB or more 1 GB or more 512 MB or more (Recommended: 1 GB or more) Display resolution 1024 × 768 pixels or higher Hard disk space Disk space required to install the software bundled with the ScanSnap is as follows: z ScanSnap Manager: 800 MB z ABBYY FineReader for ScanSnap: 570 MB z Cardiris: 130 MB z Evernote for Mac (*2): 55 MB USB port (*3) USB2.0 / USB1.1 *1 : It is recommended to apply the latest updates to the Mac OS. *2 : When using Mac OS X v10.7, you need to update to the latest version (3.0 or later) after you installed Evernote for Mac. *3 : When using a USB 3.0 port, data is transferred at the same speed as USB 2.0. ATTENTION z If the system requirements above are not satisfied, the ScanSnap may not operate. z Do not use the USB port on the keyboard or the monitor to connect the ScanSnap (it may not function properly). z Make sure to use a powered hub equipped with an AC adapter if you are using a commercially available USB hub. z Scanning speed will slow down in the following cases: - The CPU or the memory does not meet the required specifications - The version of the USB port or the USB hub is USB 1.1 z A disk space approximately three times larger than the resulting scanned file size is required when scanning documents. 27