Konica Minolta Fujitsu ScanSnap S1300i Operation Guide - Page 445
Cleaning the Outside of the ScanSnap
View all Konica Minolta Fujitsu ScanSnap S1300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 445 highlights
Cleaning the Outside of the ScanSnap Cleaning the Outside of the ScanSnap Clean the outside of the ScanSnap in the following procedure. How to perform cleaning 1. Unplug the cables from the ScanSnap. 2. Clean the outside of the ScanSnap with a dry cloth, or a cloth moistened with Cleaner F1/mild detergent. ATTENTION z Never use paint thinner or any other organic solvents. z Be careful not to get any moisture or water inside the scanner during cleaning. z It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the cloth with moderate quantity. Wipe off the cleaner completely to leave no residue on the cleaned parts. Cloth Mild detergent of Cleaner F1 Thinner 445
Cleaning the Outside of the ScanSnap
445
Cleaning the Outside of the ScanSnap
Clean the outside of the ScanSnap in the following procedure.
How to perform cleaning
1.
Unplug the cables from the ScanSnap.
2.
Clean the outside of the ScanSnap with a dry cloth, or a cloth moistened
with Cleaner F1/mild detergent.
ATTENTION
z
Never use paint thinner or any other organic solvents.
z
Be careful not to get any moisture or water inside the scanner during cleaning.
z
It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the cloth
with moderate quantity. Wipe off the cleaner completely to leave no residue on the cleaned parts.
Mild detergent of
Cleaner F1
Cloth
Thinner