Konica Minolta Fujitsu ScanSnap S1300i Operation Guide - Page 455
Confirm that the pad assy is completely locked into the retaining hooks.
View all Konica Minolta Fujitsu ScanSnap S1300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 455 highlights
Replacing the Pad Assy 5. Attach the new pad assy while pushing the pad plate down. Pad plate Pad assy ADF top section ATTENTION Make sure to install the pad assy with its front side facing up. Otherwise, paper jams or other feeding errors may occur. Front Back 6. Confirm that the pad assy is completely locked into the retaining hooks. ATTENTION Confirm that the pad assy is attached properly. Otherwise, paper jams or other feeding errors may occur. 7. Close the ADF top section. ADF top section ADF paper chute (cover) D It clicks when it returns to its original position. 8. Connect the power cable or the USB bus power cable, and turn on the ScanSnap. 455
Replacing the Pad Assy
455
5.
Attach the new pad assy while pushing the pad plate down.
6.
Confirm that the pad assy is completely locked into the retaining hooks.
7.
Close the ADF top section.
D
It clicks when it returns to its original position.
8.
Connect the power cable or the USB bus power cable, and turn on the
ScanSnap.
ATTENTION
Make sure to install the pad assy with its front side facing up.
Otherwise, paper jams or other feeding errors may occur.
ATTENTION
Confirm that the pad assy is attached properly. Otherwise, paper jams or other feeding errors may
occur.
ADF top section
Pad assy
Pad plate
Front
Back
ADF paper
chute (cover)
ADF top section