Konica Minolta Fujitsu ScanSnap S1300i Operation Guide - Page 485
Installation Specifications
View all Konica Minolta Fujitsu ScanSnap S1300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 485 highlights
Installation Specifications Installation Specifications The following table summarizes the installation specifications of the ScanSnap. Item Outer dimensions (Width × Depth × Height) Weight Input power Voltage Power cable connection USB bus power cable connection Phase Frequency range Power consumption Power cable connection USB bus power cable connection Temperature/ humidity allowable ranges Temperature Humidity Specification Minimum: 284 × 99 × 77 (mm) / 11.2 × 3.9 × 3.1 (in.) (when the ADF paper chute (cover) is closed) Maximum: 284 × 231 × 240 (mm) / 11.2 × 9.1 × 9.4 (in.) (when the ADF paper chute cover is open and the extension is extended) 1.4 kg (approx. 3.09 lb) 100 to 240 V 5 V (the computer must have two USB ports: one for power connection and one for USB cable connection) Single phase 50/60 Hz During operation: 9.0 W or less During standby: 3.2 W or less During operation: 5.0 W or less During standby: 2.0 W or less During operation: 5 to 35°C / 41 to 95°F During standby: -20 to 60°C / -4 to 140°F During storage/transportation: -20 to 60°C / -4 to 140°F During operation: 20 to 80% During standby: 8 to 95% During storage/transportation: 8 to 95% 284 mm (11.2 in.) 240 mm (9.4 in.) 231 mm (9.1 in.) 485