Konica Minolta Fujitsu ScanSnap S1300i Operation Guide - Page 449
Clean the feed roller and the eject roller with a cloth moistened with, Cleaner F1., Feed roller × 2
View all Konica Minolta Fujitsu ScanSnap S1300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 449 highlights
Cleaning the Inside of the ScanSnap 5. Clean the feed roller and the eject roller with a cloth moistened with Cleaner F1. ATTENTION z Do not use water or mild detergent to clean the inside of the ScanSnap. z It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the cloth with moderate quantity. Wipe off the cleaner completely to leave no residue on the cleaned parts. Eject roller (×2) Feed roller (×2) z Feed roller (× 2) Press the [Scan] button to rotate the roller. Gently wipe the dirt and dust off while taking care not to damage the surface of the rollers. Make sure that it is cleaned properly because residue on the roller will affect the feeding performance. z Eject roller (× 2) Press the [Scan] button to rotate the roller. Gently wipe the dirt and dust off while taking care not to damage the surface of the rollers. Make sure that it is cleaned properly because residue on the roller will affect the feeding performance. HINT Pressing the [Scan] button seven times will rotate the feed rollers and the eject rollers one revolution. 449