Konica Minolta Kodak Scan Station 710 Administration Guide - Page 114
Cleaning the separation module
View all Konica Minolta Kodak Scan Station 710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Cleaning the separation module The separation module should be removed from the Scan Station for best cleaning results. 1. Push the separation module up to snap out and lift it out of position. 2. Manually rotate and wipe the separation module tires with a roller cleaning pad. 3. Inspect the separation module. If the separation module tires show signs of wear or damage, replace the tires or the separation module. See "Replacement procedures" for more information. A-61796 December 2013 10-3
A-61796
December 2013
10-3
Cleaning the separation
module
The separation module should be removed from the Scan Station for
best cleaning results.
1.
Push the separation module up to snap out and lift it out of position.
2.
Manually rotate and wipe the separation module tires with a roller
cleaning pad.
3.
Inspect the separation module.
If the separation module tires show signs of wear or damage,
replace the tires or the separation module. See “Replacement
procedures” for more information.