Konica Minolta Kodak Scan Station 710 Administration Guide - Page 122

Reinstall the feed module by aligning the pins and pushing it toward

Get Konica Minolta Kodak Scan Station 710 PDF manuals and user guides View all Konica Minolta Kodak Scan Station 710 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 122 highlights

5. Install each new tire by gently pulling it over the core. IMPORTANT:Do not overstretch the tire; it may tear. 6. Replace the core assembly in the feed module. You may need to slide the shaft to the right or left so the core fits properly within the feed module housing. 7. Repeat the replacement procedure outlined above for the other core assembly. 8. Reinstall the feed module by aligning the pins and pushing it toward the left to fit it into position. 9. Reinstall the feed module cover by aligning the tabs in the slots and pushing the feed module cover down until it snaps into place. A-61796 December 2013 10-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
A-61796
December 2013
10-11
5.
Install each new tire by gently pulling it over the core.
IMPORTANT:Do not overstretch the tire; it may tear.
6.
Replace the core assembly in the feed module. You may need to
slide the shaft to the right or left so the core fits properly within the
feed module housing.
7.
Repeat the replacement procedure outlined above for the other core
assembly.
8.
Reinstall the feed module by aligning the pins and pushing it toward
the left to fit it into position.
9.
Reinstall the feed module cover by aligning the tabs in the slots and
pushing the feed module cover down until it snaps into place.