Konica Minolta Kodak Scan Station 710 Administration Guide - Page 29

Network Destination Credentials - when selected, define the Username, Password and Domain required to access network resources. 1. Enter the network user name assigned to the Scan Station. For more information see the section entitled, "Network configuration details" in Chapter 2. NOTE: If you want the Scan Station to have access to network printers or network shared folders, the credentials provided must have sufficient privileges to access these resources. 2. Enter the password for the network user name in the Password field. NOTE: This password is only used by the Scan Station and will never be displayed in readable form. The password is stored in encrypted format. 3. Enter the Microsoft network domain name which the Scan Station will be connected to in the Domain field. In a workgroup environment, this field can be left blank. Remote Configuration Settings - the Scan Station can be configured to look for an updated configuration on specific days and times. Select this option to allow your Scan Station to automatically look for an updated configuration. 1. Enter a network folder where the Scan Station will find updated configuration settings. 2. Select which day(s) of the week this operation will be performed. 3. Select the time of day you want your Scan Station to check for updates. NOTE: When updating a configuration using this method, the fields on the Add Scanner/Modify Scanner dialog box will not be updated: Device Name, IP Address and Device Password. 4-4 A-61796 December 2013