Konica Minolta bizhub 20 bizhub 20 Network User Guide - Page 21
Using the control panel to con your machine for a network, STATIC, Boot Method BOOT Method
View all Konica Minolta bizhub 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Configuring your machine for a network d Choose STATIC from Boot Method (BOOT Method). Enter the IP Address, Subnet Mask and Gateway (if needed) of your print server. Windows® Macintosh 2 e Click OK. f With the correctly programmed IP address, you will see the KONICA MINOLTA print server in the device list. Using the control panel to configure your machine for a network 2 You can configure your machine for a network using the control panel Network menu. See Control panel setup on page 17. Using other methods to configure your machine for a network 2 You can configure your machine for a network using other methods. See Other ways to set the IP address (for advanced users and administrators) on page 113. 14
Configuring your machine for a network
14
2
d
Choose
STATIC
from
Boot Method (BOOT Method)
. Enter the
IP Address
,
Subnet Mask
and
Gateway
(if needed) of your print server.
e
Click
OK
.
f
With the correctly programmed IP address, you will see the KONICA MINOLTA print server in the device
list.
Using the control panel to configure your machine for a network
2
You can configure your machine for a network using the control panel
Network
menu.
See
Control panel setup
on page 17.
Using other methods to configure your machine for a network
2
You can configure your machine for a network using other methods.
See
Other ways to set the IP address (for advanced users and administrators)
on page 113.
Windows
®
Macintosh