Konica Minolta bizhub 20 bizhub 20 Network User Guide - Page 49
Restoring the network settings to factory default, Printing the Network Configuration List, Start
View all Konica Minolta bizhub 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Control panel setup Restoring the network settings to factory default 3 If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow these steps: Note This function restores all wired and wireless network settings to the factory default. 3 a Press Menu. b Press a or b to choose Network. Press OK. c Press a or b to choose Network Reset. Press OK. d Press 1 to choose Reset. e Press 1 to choose Yes for reboot. f The machine will re-start. You can now reconnect the network cable and configure the network settings to work with your network. Printing the Network Configuration List 3 Note Node name: Node name appears on the Network Configuration List. The default node name is "KMNxxxxxxxxxxxx". ("xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.) The Network Configuration List prints a report listing all the current network configuration including the network print server settings. a Press Menu. b Press a or b to choose Print Reports. Press OK. c Press a or b to choose Network Config. Press OK. d Press Start. Note If the IP Address on the Network Configuration List shows 0.0.0.0, wait for one minute and try again. 42