Kyocera FS 2000D FS-2000D/3900DN/4000DN Operation Guide Rev-1.2 (Advanced Edit - Page 101
Setting the Paper Weight, Setting the Duplex Path
View all Kyocera FS 2000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Using the Operation Panel Rough Letterhead Color Prepunched Envelope Cardstock Thick High quality 7 When the paper type to be customized is displayed, press [OK]. 8 Press B and proceed to Setting the Paper Weight. Setting the Paper Weight You can set the paper thickness for your custom paper type to be customized. 1 Display the custom paper type (refer to Creating Custom Paper Type on page 2-74) and press B. 2 Press ? or @ repeatedly until >>Paper Weight appears. >>Paper Weight Normal 2 3 Press [OK]. A blinking question mark (?) appears. >>Paper Weight ? Normal 2 4 Press ? or @ to display the desired paper thickness. The display changes as shown below. For details of the default setting for each paper type, refer to Paper Availability on page 1-2. Light Normal 1 Normal 2 Normal 3 Heavy 1 Heavy 2 Heavy 3 Extra Heavy 5 When the desired paper thickness is displayed, press [OK] and proceed to Setting the Duplex Path on page 2-75. Setting the Duplex Path You can set whether or not to enable duplex printing as follows. The default setting is Enable. 1 Display the custom paper type (refer to Creating Custom Paper Type on page 2-74) and press B. ADVANCED OPERATION GUIDE 2-75