Kyocera FS 2000D FS-2000D/3900DN/4000DN Operation Guide Rev-1.2 (Advanced Edit - Page 76
Setting Print Quality, KIR Mode
View all Kyocera FS 2000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Using the Operation Panel Setting Print Quality KIR Mode In Print Quality menus, you can set the KIR mode, EcoPrint mode, and other settings. This printer incorporates the KIR (Kyocera Image Refinement) smoothing function. KIR users the software to enhance resolution, resulting in high quality printing at resolution of 600 dpi and 300 dpi. The default is On. KIR has no effect on the printing speed. 2-50 With KIR Off With KIR On (default) NOTE: Set the print density to 03 when setting the KIR mode. For details on the print density, refer to Print Density on page 2-52. You can monitor the KIR test pattern, the last line on a status page, to make the optimum KIR mode setting. Look at the check line, the last line on a status page, to make the optimum KIR mode setting. Status Page KIR Test Pattern Optimized stripes The current KIR setting is optimal. Dark vertical stripes Set the KIR mode to Off. Try printing the status page again. If you still get dark vertical stripes, adjust the print density control to a lighter setting. White vertical stripes Set the KIR mode to On. Try printing the status page again. If you still get white vertical stripes, adjust the print density control to a darker setting. ADVANCED OPERATION GUIDE