Kyocera FS 2000D FS-2000D/3900DN/4000DN Operation Guide Rev-1.2 (Advanced Edit - Page 97
Duplex Printing, Binding Modes
View all Kyocera FS 2000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Using the Operation Panel the installed optional paper feeders (from the top most paper cassette to the bottom paper cassette): MP tray Cassette 1 Cassette 2 Cassette 3 (FS-3900DN/FS-4000DN only) Cassette 4 (FS-3900DN/FS-4000DN only) 7 When the desired paper source is displayed, press [OK]. 8 To exit the menu selection, press [Menu]. Duplex Printing You can automatically print on both sides of the paper. Duplex printing is available for the following paper types: Plain Preprinted Bond Recycled Rough Letterhead Color Prepunched High quality Custom 1 (to 8) Activating the duplexer is done by selecting either short edge or long edge binding mode. NOTE: Duplex printing can be also performed from the MP tray. When the MP tray is set to First Mode (First), the paper size and paper type will be the same as those of the paper cassette currently set at the paper feed source. If the paper to be fed from the MP tray does not match the paper size and paper type of the current paper feed source cassette, a paper jam may occur. Binding Modes Binding refers to the manner in which printed pages of paper are joined together (by gluing, stitching, etc.) in book form. The two possible types of binding are: long-edge binding, in which pages are joined together along their long edge; and short-edge binding, in which they are joined together along their short edge. In selecting a binding type, you must also consider the orientation of the printed page. You can use long-edge or short-edge binding with either landscape or portrait printing. ADVANCED OPERATION GUIDE 2-71