Kyocera KM-4850w KM-4850W Operation Guide Rev-8 - Page 19
How to Use the Carrier Sheet option
View all Kyocera KM-4850w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
q When the original is curled: Open the original cover and set the original a little shifted from the position indicated by the original size indication toward the rear side (roller position at the rear side). * When closing the original cover, grasp it with both hands and close it securely until it clicks. CHAPTER 3 PREPARATIONS 3 Place the original face down and put the leading edge of the original securely to the leading edge guide 1. q Setting the original with precision When copying a long original particularly, set the original as follows. NOTE • If the leading edge of the original is bulged at the leading edge guide, the original may be fed obliquely. Take care in setting the original. 1 Adjust both the original guides to the original size indications on the original table. 4 Close the original leading edge cover. Press the Start key to start copying. 2 Open the original leading edge cover. (5) How to Use the Carrier Sheet (option) When using originals described in "Carrier sheet (option)", use this carrier sheet. (Page 3-1) Carrier sheet sizes: 36" x 48", 24" x 36" (A0, A1, A2) 1 Open the carrier sheet by lifting up the transparent side and place the original face up between the two sheets. Set the original aligning it with the folding portion of the carrier sheet. 3-3