Kyocera KM-4850w KM-4850W Operation Guide Rev-8 - Page 93

When Paper or an Original Jams

Get Kyocera KM-4850w PDF manuals and user guides View all Kyocera KM-4850w manuals
Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

CHAPTER 8 TROUBLESHOOTING 6. When Paper or an Original Jams When paper or an original jams, copying will stop and a message indicating a jam will appear. Keep the main power switch on ( ❘ ) and remove the jammed paper in accordance with the message. (1) Jam location display 1 2 3 (3) Removal procedure 1 If "Paper misfeed. Press "Cut paper" key." or "Paper misfeed. Pull out original table. " appears: Paper has jammed in the machine. Perform the following procedure to remove the jammed paper. (Inch) 1 Jam in the machine 2 Jam in the bypass slot (Page 8-11) 3 Jam in the paper feed section (Page 8-11) q Jam in the original cover (Page 8-13) (Metric) (2) Cautions (Inch) WARNING High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock. (Metric) CAUTION The copier's fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of getting burned. • Do not reuse any paper that has jammed. • If the jammed paper tears during removal, make sure not to leave any pieces inside the machine as this would cause another jam. • After removal of jammed paper or original, warm up will begin, the message will go out, and the machine will return to the settings before the jam has occurred. 1 If "Press "Cut paper" key." appears, press the Roll Cut key. IMPORTANT • Do not open any cover before pressing the Roll Cut key. 8-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
CHAPTER 8
TROUBLESHOOTING
8-9
(Inch)
(Metric)
(Inch)
(Metric)
1
WARNING
High voltage is present in the charger section. Take sufficient
care when working in this area, as there is a danger of
electrical shock.
1
2
3
6. When Paper or an Original Jams
When paper or an original jams, copying will stop and a message indicating a jam will appear. Keep the main power switch on (
❘
) and remove the
jammed paper in accordance with the message.
(1) Jam location display
1
Jam in the machine
2
Jam in the bypass slot (Page 8-11)
3
Jam in the paper feed section (Page 8-11)
●
Jam in the original cover (Page 8-13)
(2) Cautions
• Do not reuse any paper that has jammed.
• If the jammed paper tears during removal, make sure not to leave
any pieces inside the machine as this would cause another jam.
• After removal of jammed paper or original, warm up will begin, the
message will go out, and the machine will return to the settings
before the jam has occurred.
(3) Removal procedure
1
If “Paper misfeed. Press “Cut paper” key.” or “Paper misfeed. Pull
out original table. “ appears:
Paper has jammed in the machine. Perform the following procedure
to remove the jammed paper.
If “Press “Cut paper” key.” appears, press the Roll Cut key.
IMPORTANT
• Do not open any cover before pressing the Roll Cut key.
CAUTION
The copier's fixing unit is extremely hot.
Take sufficient care
when working in this area, as there is a danger of getting
burned.