Kyocera KM-4850w KM-4850W Operation Guide Rev-8 - Page 29
Paper Material Selection
View all Kyocera KM-4850w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4. Paper Material Selection If the Media key is pressed, the paper material to be used can be selected from "Plain", "Vellum ", "Film", and "Custom ". If the paper material is selected, fixing temperature and copy size will be automatically adjusted. If "Custom" is selected, paper material, fixing temperature, and copy size that have been set by using "@ Custom media type [Custom.pap.material]" of the default setting will be selected. (Page 7-3) If "2 Media Type [Paper working]" of the default setting is set to "ON", the paper material installed in each paper source can be registered. If the Paper Source key is pressed to select a paper source, the paper material setting will be automatically changed. See "2 Media Type [Paper working]" and "3 Media type setting [Paper material adjustment]" of the default setting. (Page 7-1) CHAPTER 4 BASIC COPYING 4 Check that the selected paper material is displayed in the message display. When the paper material is changed, wait until the fixing temperature is stabilized. Scanning of an original, however, can be performed. (Inch) 1 Press the Media key. (Inch) (Metric) (Metric) 2 Press the w or v key to select the paper material to be used. Select the material from "Plain", "Vellum", "Film", and "Custom". (Inch) (Metric) 3 Press the OK key. 4-5