Kyocera KM-4850w KM-4850W Operation Guide Rev-8 - Page 65

q Items for manager only CHAPTER 7 MANAGEMENT AND SETTING Setting item 9 Standard drawer Details Default paper source can be selected. 0 Auto select set Default copy mode ("APS", "AMS", or "Manual") can be selected. Selectable values Default Paper source 1 (only if an optional roll unit is installed)/ paper source 2/ paper source 3/ bypass Paper source 2 Page 7-19 APS/ AMS/ Manual Manual 7-19 ! AMS mode If a paper source is specified when the APS mode has been set, copying with a preset magnification ratio or the AMS mode will be selected. Whether copying with a preset magnification ratio ("OFF") or the AMS mode ("ON") is selected can be specified. ON/OFF @ Method copy start If "Start key" is selected, scanning of original will start when the Start Auto start/ key is pressed after an original has been set. If "Auto start" is selected, Start key scanning of original will start automatically when an original is set. OFF 7-19 Auto start 7-20 # Start late time If "@ Method copy start" is set to "Auto start", the time between setting 0.5 sec./ 1 sec./ 2 sec./ 0.5 sec. of original and start of copying can be set. 3 sec./ 4 sec./ 5 sec. 7-20 $ Paper cut Default paper cut size can be selected. [Selec.cut. Method] "User 1" and "User 2" are the lengths that have been set by "4 Cut size register". For A sizes (metric machine) Synchronized cut/ 1189 mm/ 841 mm/ 594 mm/ 420 mm/ 297 mm/ User 1, 2 Synchronized cut For B sizes (metric machine) Synchronized cut/ 1030 mm/ 728 mm/ 515 mm/ 364 mm/ User 1, 2 Architecture (inch machine) Synchronized cut/ 12.0"/ 18.0"/ 21.0"/ 24.0"/ 36.0"/ 42.0"/ 48.0"/ User 1, 2 Engineering (inch machine) Synchronized cut/ 11.0"/ 17.0"/ 21.0"/ 22.0"/ 34.0"/ 42.0"/ 44.0"/ User 1, 2 7-20 7-5