Kyocera KM-4850w KM-4850W Operation Guide Rev-8 - Page 90
Countermeasures against Memory Overflow
View all Kyocera KM-4850w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
CHAPTER 8 TROUBLESHOOTING 4. Countermeasures against Memory Overflow This machine stores image data in memory and then performs copying. Since the memory capacity is limited, memory overflow may occur during copying and the following messages may appear. If "( Memory compress" of the default setting is set to "Standardcompression" from "Low-compression" or to "High-compression" from "Standard-compression", the image data capacity in the memory can be increased. If the compression ratio is set to a higher level, however, halftone (gray) images may be deteriorated. (Page 7-6) * If memory overflow occurs frequently, addition of memory is recommended. Contact a dealer of our products. If the message "Memory full" appears: This message may appear when scanning of original is performed before copying for using the sort copy, editing functions, job reserve or interrupt copy. If memory overflow has occurred in job reserve or interrupt copy, wait until the current output is complete. If memory overflow has occurred in sort copy, reduce the number of originals. * This message may appear when the length of originals you use on a reduction copying is longer than the length registered in the "‹ Reduce length Ldt. " on page 7-7. In a case like that, make the registerd length longer than the length of originals you use. (Inch) If the message "Could not be saved." appears: This message may appear when copying is performed while the original is being scanned in normal copying. The overall image data could not be saved in memory. If the number of copies is more than 1, only one copy will be output. Repeat copy is not possible. (Metric) (Inch) (Metric) 1 Press the OK key. A selection screen for original ejection direction will appear. 2 Press the w or v key to select the original ejection direction. (Inch) (Metric) 8-6