Kyocera KM-4850w KM-4850W Operation Guide Rev-8 - Page 97
Roll Cut key.
View all Kyocera KM-4850w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
8 Push the roll unit securely back into the machine. CHAPTER 8 TROUBLESHOOTING 1 Grasp the original cover with both hands and open them. 9 Close the front cover. 10 If the leading edge of the paper is not cut straight, press the Roll Cut key. The leading edge of the paper will be cut. q Original jam in the original cover If an original has jammed in the original cover, the following message will appear. Perform the following procedure to remove the jammed original. If the message "Set original again" appears, reset the original. (Inch) 2 Remove the jammed original without tearing it. (Metric) 3 Gently close the original cover. (Inch) (Metric) 8-13
CHAPTER 8
TROUBLESHOOTING
8-13
8
9
10
(Inch)
(Metric)
1
2
3
(Inch)
(Metric)
Push the roll unit securely back into the machine.
Close the front cover.
If the leading edge of the paper is not cut straight, press the
Roll Cut key.
The leading edge of the paper will be cut.
●
Original jam in the original cover
If an original has jammed in the original cover, the following message
will appear. Perform the following procedure to remove the jammed
original. If the message “Set original again” appears, reset the
original.
Grasp the original cover with both hands and open them.
Remove the jammed original without tearing it.
Gently close the original cover.