Kyocera KM-4850w KM-4850W Operation Guide Rev-8 - Page 54
Preview Copy
View all Kyocera KM-4850w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
CHAPTER 6 CONVENIENT FUNCTIONS 3. Preview Copy When copying a long original, this function can be used to copy onto paper of the minimum length to check the copy functions and copy contrast, allowing waste of paper to be reduced. This machine provides the following preview copy functions. q Preview image If some editing functions or zoom mode are set or paper material is changed, output a preview image sample. A sample copy from the current copy settings will be cut in length of 11" (279 mm) and output. Check the sample copy and adjust the copy settings. 2 Press the Preview Copy key. The Preview Copy indicator will light up. (Inch) (Metric) * When making a preview contrast sample, use the numeric keys to input the leading edge position of the original. Then press the OK key. (Inch) q Preview contrast A sample copy with seven steps of copy contrast is output. The part of an original of 0 to 237" [0 to 6000 mm] from the leading edge is used as a sample and a copy in length of 13" [330 mm] (145" [370 mm] for photo original) is output. Check the sample copy and adjust the copy contrast setting. (Metric) NOTE • Preview image and preview contrast can be changed by using "¤ Adj. preview copy" of the default setting. (Page 7-7) 1 Set the copy settings such as copy functions and copy contrast as needed. 6-6 3 Set an original. Copying will start and a sample copy will be output. 4 Check the copy and adjust the copy settings. If the mirror mode is changed, restart from step 1. 5 Press the Repeat Copy key. To output a sample copy again, press the Start key. To start copying of the whole original, proceed to the next step. If "& Per rep copy [Permit repeat]" of the default setting is set to "Deny" ["Unpermit"], reset the original and make a copy. If "Code number" ["Id-code"] is set, use the numeric keys to enter the repeat copy code. (Page 7-6) 6 Press the Preview Copy key. The Preview Copy indicator will go out. 7 Check the number of copies and press the Start key. Copying will start.