Kyocera KM-4850w KM-4850W Operation Guide Rev-8 - Page 25
Basic Copying, Caution
View all Kyocera KM-4850w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
CHAPTER 4 BASIC COPYING 1. Before starting copying (1) Initial state When the main power switch of this machine is turned on ( ❘ ) (and warm up is complete, the machine is ready to copy. This state is called initial state and the screen displayed in this state is called basic screen. The machine also enters the initial state when the auto clear function is activated or the Reset key is pressed. Be sure to ensure that the machine is in the initial state before copying. When the auto clear function is activated, however, the exposure display will not return to the initial setting. (3) When using a key counter (option) If the message "Insert key counter." appears, a key counter must be set in this machine. Insert the key counter all the way into the key counter insert slot located on the right of the main body. (Inch) (Metric) (2) When the Energy Saver indicator is lit When the Energy Saver indicator is lit and other indicators are off on the operation panel, the machine is in the energy saver mode. When the Energy Saver key is pressed, warm up will start. (Inch) (Metric) CAUTION If the copier will not be used for a short period of time (overnight, etc.), turn the main switch OFF (O). If it will not be used for an extended period of time (vacations, etc.), remove the power plug from the outlet for safety purposes during the time the copier is not in use. 4-1