Kyocera KM-4850w KM-4850W Operation Guide Rev-8 - Page 60
Auto Clear Function, Energy Saver Function, Auto Shut-off Function - consumables
View all Kyocera KM-4850w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
CHAPTER 6 CONVENIENT FUNCTIONS 7. Auto Clear Function The machine automatically returns to the initial state when a certain time elapses after a copy run is complete. (The copy contrast setting, however, does not return to the initial setting.) Before the auto clear function is activated, copying with the same copy setting and the same number of copies can be repeated. Also the repeat copy function can be used for copying. The time that elapses before the auto clear function is activated (auto clear time) can be set from 10 to 300 seconds in 10 second increments by using "9 Timer Set" of the default setting. (Page 7-2) To disable the auto clear function, set "7 Auto Clear Timer [Auto clear time]" to "OFF". (Page 7-2) 8. Energy Saver Function When this machine is not used for some time, press the Energy Saver key. Only the Energy Saver indicator will light up and the machine enters a resting state. If the Energy Saver function is used, warm up time is shorter than the warm up time after the main power switch is turned off (O) and then on again. If copy operation is not used for a certain time, the machine will automatically enter a resting state when the auto energy saver time elapses. The factory default setting of the auto energy saver time is 15 minutes. The auto energy saver time can be set to from 5 minutes to 45 minutes (in 5-minute increments), 60 minutes, 90 minutes, 120 minutes, 180 minutes or 240 minutes by using "9 Timer Set" of the default setting. (Page 7-2) To restart copying, press the Energy Saver key again. 9. Auto Shut-off Function The auto shut-off function automatically turns off (O) the power if no copying operation is performed for a certain time. Copiers generally consume much power during standby because standby time is much longer than copying time. The function of automatic turning off (O) the copier can reduce unnecessary power consumption in standby or at night where power is left on by mistake, resulting in reduction of electricity bill. To restore from the auto shut-off, turn the main power switch on ( ❘ ). The factory default setting of the time that elapses before the auto shut-off is activated (auto shut-off time) is 90 minutes. The auto shut-off time can be set to from 5 minutes to 45 minutes (in 5-minute increments), 60 minutes, 90 minutes, 120 minutes, 180 minutes or 240 minutes by using "9 Timer Set" of the default setting. (Page 7-2) To disable the auto shut-off function, see "8 Auto Shut-off Time [Auto shutoff time]" of the default setting. (Page 7-2) 6-12