Kyocera KM-4850w KM-4850W Operation Guide Rev-8 - Page 31
Numeric key input
View all Kyocera KM-4850w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2 Press the w or v key to select "Standard cut" ["Standard size"]. (Inch) (Metric) CHAPTER 4 BASIC COPYING (3) Numeric key input Enter the desired cut size using the numeric keys. For paper in the bypass table, cut cannot be selected. 1 Press the Cut Size key. (Inch) (Metric) 3 Press the OK key. 4 Press the w or v key to select the desired cut length. (Inch) (Metric) 5 Press the OK key. The machine will return to the basic screen. 2 Press the w or v key to select "# keys". (Inch) (Metric) 3 Use the numeric keys to enter the desired cut size. The cut size that can be entered is 11" to 237" [279 to 6,000 mm]. (Inch) (Metric) NOTE The cut size can be changed by using the numeric keys after pressing the Cut Size key. 4 Press the OK key. The machine will return to the basic screen. Confirm that the selected size is displayed. 4-7