Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 113
Vertical stripes, In case that no improvement is observed, contact our service, representative
![]() |
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Troubleshooting > Troubleshooting When Printing Image CAUTION Do not to touch the print head when clearing paper jams inside the machine. It may cause image problems or damage of the print head. If paper jam is not solved, contact our service representative. 2 In case that no improvement is observed, contact our service representative Vertical stripes 1 Check ink "Troubleshooting When Printing Image" > "Vertical void line, band or stripes" (Chapter 19) in Operation Guide In case that no improvement is observed, then go to next step. 2 Execute print head cleaning Ink get dried in nozzle. Bubble is in nozzle. Paper dust or foreign material is on nozzle. 1 Load SRA3/Ledger size paper. 2 [Home] key > [...] > [Professional Settings] > [U744 Head Cleaning] > [02 Check] A nozzle check pattern is printed. 3 Align the mark on the chart arrow with the mark on the upper left corner of the platen glass. As shown in the illustration, place the pattern on the glass platen with the printed side down and the edge with the arrows toward the back. NOTE The printed position of the arrows in the nozzle check pattern may be in from the edge, depending on the size of the pattern. Regardless of the position of the arrows, place the pattern in the upper left corner of the glass platen. 4-10
![](/manual_guide/products/kyocera-taskalfa-pro-15000c-pro-15000c-advanced-operation-guide-39e41b5/113.png)