Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 127
Front/Back position shift, Paper load check, Clean the feed roller or retard roller, Check paper
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Troubleshooting > Troubleshooting When Printing Image 6 Select an item. Select [01 Main Scan] or [02 Sub Scan]. 7 Change the value using the [+], [-] keys or the numeric keypad. Select the values (0-9, A-I) read from the chart, enter the appropriate value. 8 Press the [Start] key > [Stop] key. The entered value is reflected. 9 In case that no improvement is observed, then go to next step. 2 Paper load check Loading Paper (Chapter 7) in Operation Guide In case that no improvement is observed, then go to next step. 3 Clean the feed roller or retard roller Slip with dirty roller. 1 Check dirt on the rollers and clean up dirty parts. Parts Cleaning (page 3-2) 2 In case that no improvement is observed, contact our service representative. Front/Back position shift AA Bad Good 1 Check paper "Troubleshooting When Printing Image" > "Front/Back position shift" (Chapter 19) in Operation Guide In case that no improvement is observed, then go to next step. 2 Paper load check Loading Paper (Chapter 7) in Operation Guide In case that no improvement is observed, then go to next step. 3 Check the print zoom. 1 If you are using Fiery Controller, adjust the print zoom of the second side (back side) in increments of 0.1%. Printing System 50 user guides You can download the user guide from the URL below. https://services.efi.com/support/vfigs/3784295173/default.aspx 4-24