Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 65
Fasten a screw on each side of the rail of deck feed unit.
![]() |
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Maintenance > Parts Cleaning 34 Attach the stop ring. IMPORTANT Make sure that attached shaft is on the position shown below. 35 Move the lever for retard pressure to the original position. 36 Attach the right rail bracket, and fasten each two screws on right and left side of horizontal conveying upper guide.. 37 Attach the feed roller drive assy. Tilt the unit slightly to the right when viewed from the front of the main unit, and then hook it. 38 Fasten a screw on each side of the rail of deck feed unit. 39 Move the deck feed unit to its original position. 3-23
![](/manual_guide/products/kyocera-taskalfa-pro-15000c-pro-15000c-advanced-operation-guide-39e41b5/65.png)
3-23
Maintenance > Parts Cleaning
34
Attach the stop ring.
35
Move the lever for retard pressure to the original position.
36
Attach the right rail bracket, and fasten each two screws on
right and left side of horizontal conveying upper guide..
37
Attach the feed roller drive assy.
Tilt the unit slightly to the right when viewed from the front of the main unit, and then hook it.
38
Fasten a screw on each side of the rail of deck feed unit.
39
Move the deck feed unit to its original position.
IMPORTANT
Make sure that attached shaft is on the position shown below.