Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 85
Select [01 Cassette 1] or [02 Cassette 2] > [Start] key., Maintenance Counter].
![]() |
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Maintenance > Parts Replacement IMPORTANT Make sure that attached shaft is on the position shown below. 18 Move the lever for retard pressure to the original position. 19 Attach the cassette feed unit to cassette 1. 20 Return the Cassette 1 to its original position, and close Front Covers 2 and 4. 21 [Home] key > [...] > [Professional Settings] > [U251 Clear Maintenance Counter]. 22 Select [01 Cassette 1] or [02 Cassette 2] > [Start] key. The counter for replaced part is cleared. Check the status after replacement Make a test print and check that there are no paper jams, double feed or no feed. If there is any problem, try again from step 1. If the problem is not resolved, contact your service representative. 3-43
![](/manual_guide/products/kyocera-taskalfa-pro-15000c-pro-15000c-advanced-operation-guide-39e41b5/85.png)
3-43
Maintenance > Parts Replacement
18
Move the lever for retard pressure to the original position.
19
Attach the cassette feed unit to cassette 1.
20
Return the Cassette 1 to its original position, and close Front
Covers 2 and 4.
21
[Home] key > [...] > [Professional Settings] > [U251 Clear
Maintenance Counter].
22
Select [01 Cassette 1] or [02 Cassette 2] > [Start] key.
The counter for replaced part is cleared.
Check the status after replacement
Make a test print and check that there are no paper jams, double feed or no feed. If there is any problem, try again from
step 1.
If the problem is not resolved, contact your service representative.
IMPORTANT
Make sure that attached shaft is on the position shown below.