Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 167
Air Ast OnTC, Air Ast OnDC, Air Ast PS, Air Ast PD, Air Ast OffTC, Air Ast OffDC
![]() |
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Troubleshooting > Troubleshooting When Discharging Paper Item Air Ast P(S) Air Ast P(D) Description You can select whether the air assist function for singlesided print is to be in the upper curl mode or the lower curl mode. You can select whether the air assist function for doublesided print is to be in the upper curl mode or the lower curl mode. Range 0: Top curl mode 1: Down curl mode 0: Top curl mode 1: Down curl mode Default - - 3 Adjust the setting value using [+], [-] key and numeric keypad. The range of the set value is as follows. For example, in the case of single-sided printing on the front side, there is a tendency to lower curl, so select [Air Ass On(DC)]. Item Description Range Default Amount of change Air Ast On(TC) Adjust the timing to turn on -100 to 100 0 the air assist in the upper curl mode. 10msec Air Ast Off(TC) Adjust the timing to turn off -100 to 100 0 the air assist in the upper curl mode. 10msec Air Ast On(DC) Adjust the timing to turn on -100 to 100 0 the air assist in the down curl mode. 10msec Air Ast Off(DC) Adjust the timing to turn off -100 to 100 0 the air assist in the down curl mode. 10msec Increasing the value of [Air Ast On(TC)] resolves the non-feed to the stacker, but makes it difficult to align the edges of the output paper. On the other hand, if you increase the value of [Air Ast On(DC)], the edges of the output paper will be aligned, but a paper jam or non-feed may occur. 4 Press the [Start] key. 4-64
![](/manual_guide/products/kyocera-taskalfa-pro-15000c-pro-15000c-advanced-operation-guide-39e41b5/167.png)