Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 123
depending on the size of the pattern. Regardless of the position of the arrows, place
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Troubleshooting > Troubleshooting When Printing Image NOTE The printed position of the arrows in the nozzle check pattern may be in from the edge, depending on the size of the pattern. Regardless of the position of the arrows, place the pattern in the upper left corner of the glass platen. 4 Press the [Start] key. The chart is scanned and the Head drive voltage is automatically adjusted. 5 In case that no improvement is observed, then go to next step to adjust the Head drive voltage manually. 5 Adjust the ink density for each nozzle (Manual Correction) 1 [Home] key > [...] > [Professional Settings] > [U750 Set Head Coefficient] > [02 Manual] > [01 Inkjet Matte Paper] or [02 Other Paper] > [01 Print] The check chart for uneven density is printed. 4-20