Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 164

Troubleshooting > Troubleshooting When Discharging Paper Item Range Default 09 Save Drum(2nd F) -15 to 15 0 10 Save Drum(3rd C) -15 to 15 0 11 Save Drum(2nd C) -15 to 15 0 If the second sheet is out of position, adjust10 Save Drum(3rd C)]. Amount of change 0.15 mm 0.15 mm 0.15 mm 3 Press the [Start] key > [Stop] key. Remedy 2: Adjust the paper pull-in timing for the 3rd and the 4th and subsequent sheets If there is a gap in the pull-in timing of the sheets up to the 2nd sheets, adjust pull amount. 1 [Home] key > [...] > [Professional Settings] > [246 Adjust Finisher] > [Finisher] > [13 Pull Amount] 2 Adjust the setting value using [+], [-] key and numeric keypad. The range of the set value is as follows. Item 13 Pull Amount Range 0 to 30 Default 0 Amount of change 2 msec 3 Press the [Start] key > [Stop] key. The edge of a stack papers is misaligned 1 [Home] key > [...] > [Professional Settings] > [246 Adjust Finisher] > [04 Stacker1] or [05 Stacker2] 2 Adjust the setting value using [+], [-] key and numeric keypad. The range of the set value is as follows. Item Jogger(A3) Jogger(B4) Jogger(A4R) Jogger(A4E) Jogger(A5R) Description Adjust the alignment position of A3 paper. Adjust the alignment position of B4 paper. Adjust the alignment position of A4R paper. Adjust the alignment position of A4E paper. Adjust the alignment position of A5R paper. Range -30 to +30 Default 0 Amount of change 0.1 mm -30 to +30 0 0.1 mm -30 to +30 0 0.1 mm -30 to +30 0 0.1 mm -30 to +30 0 0.1 mm 4-61