Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 67
Vertical Conveying Unit, Open Right Cover.
![]() |
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Maintenance > Parts Cleaning Vertical Conveying Unit 1 Open Right Cover. If the optional Paper Feeder is installed, open the front cover of the Bridge Kit for Main Unit to Paper Feeder, and then open Right Cover. 2 Moisten the Kim towel with deionized water and wipe off paper dust around the sensor unit. 3 Close Right Cover. Check the status after cleaning Make a test print and check that the print result is not soiled. If there is any problem, try again from step 1 If the problem is not resolved, contact your service representative. 3-25
![](/manual_guide/products/kyocera-taskalfa-pro-15000c-pro-15000c-advanced-operation-guide-39e41b5/67.png)
3-25
Maintenance > Parts Cleaning
Vertical Conveying Unit
1
Open Right Cover.
If the optional Paper Feeder is installed, open the front cover of the Bridge Kit for Main Unit to
Paper Feeder, and then open Right Cover.
2
Moisten the Kim towel with deionized water and wipe off paper
dust around the sensor unit.
3
Close Right Cover.
Check the status after cleaning
Make a test print and check that the print result is not soiled. If there is any problem, try again from step 1
If the problem is not resolved, contact your service representative.