Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 121
Thick fine lines, Check and change paper, Check ink, Check media setting, Execute print head cleaning
![]() |
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Troubleshooting > Troubleshooting When Printing Image 6 Select the color which has clogged nozzles > select [Strong] as the strength of cleaning > [Start] key. The head cleaning begins. 7 If the nozzle clog is not solved using head cleaning three times, change the strength of cleaning to [Ex Strong] and execute cleaning three times. 8 In case that no improvement is observed, then go to next step. 3 Check and change paper "Troubleshooting When Printing Image" > "Blurred image" (Chapter 19) in Operation Guide In case that no improvement is observed, then go to next step. 4 Check ink "Troubleshooting When Printing Image" > "Blurred image" (Chapter 19) in Operation Guide If the problem is not solved, contact to our service representative. Thick fine lines abc Bad abc Good 1 Check media setting Media Type and Media Weight (Chapter 15) in Operation Guide In case that no improvement is observed, then go to next step. 2 Execute print head cleaning Landing point is shifted because of high viscosity. 1 Load SRA3/Ledger size paper. 2 [Home] key > [...] > [Professional Settings] > [U744 Head Cleaning] > [02 Check] A nozzle check pattern is printed. 3 Align the mark on the chart arrow with the mark on the upper left corner of the platen glass. As shown in the illustration, place the pattern on the glass platen with the printed side down and the edge with the arrows toward the back. 4-18
![](/manual_guide/products/kyocera-taskalfa-pro-15000c-pro-15000c-advanced-operation-guide-39e41b5/121.png)