Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 96
Front Covers 2 and 4., Move the deck feed unit to its original position.
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Maintenance > Parts Replacement IMPORTANT Make sure that attached shaft is on the position shown below. 28 Move the lever for retard pressure to the original position. 29 Attach the right rail bracket, and fasten each two screws on right and left side of horizontal conveying upper guide.. 30 Attach the feed roller drive assy. Tilt the unit slightly to the right when viewed from the front of the main unit, and then hook it. 31 Fasten a screw on each side of the rail of deck feed unit. 32 Move the deck feed unit to its original position. 33 Turn the lock lever to its original position. 34 Return the Cassette 2 and 3 to its original position, and close Front Covers 2 and 4. When attaching Cassette 3 or 4, accommodate the rails inside the main unit beforehand so that it does not slip from the rail. 3-54