Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 29
Con the following settings after adjusting the print
![]() |
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Daily Management and Maintenance > Improving and maintaining of print quality IMPORTANT • After adjusting the print margin, confirm that the print start position of the image is 20 mm in [U034 Adjust Paper Timing Data] of the professional settings. • During double-sided printing, if there is a high-density printed image near the margin on the first side, the paper may curl and a paper jam may occur under the print head during the second side printing. In addition, the ink on the print head may adhere to the paper and stain it. Change the heavy weight paper and adjust decurl setting to avoid the problem. A screen for configuring the paper source, paper size, duplex printing, rotation, color/ monochrome, number of copies, DP duplex, and paper output is displayed. Configure the items as necessary. 3 Configure the following settings after adjusting the print margin before printing from the Fiery controller. If you want to set the minimum margin only for a specified job, configure the minimum margin in the Job Properties. Add a check mark on [Narrow Edge Margin] of [QUICK ACCESS] tab or [MEDIA] tab for Fiery controller. If you want to set a minimum margin for all jobs, configure the minimum margin in job default settings of Fiery Command Workstation. This setting will be applied from the next job imported. Select [Server] > [Set Default..] > MEDIA, from Fiery Command Workstation, and add a check mark on [Narrow Edge Margin]. 2-16
![](/manual_guide/products/kyocera-taskalfa-pro-15000c-pro-15000c-advanced-operation-guide-39e41b5/29.png)