Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 20
Conveying CIS] > [01 Center Pos Adj] > [02 Print] > [Start] key
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Daily Management and Maintenance > Improving and maintaining of print quality 6 Measure the length from the leading edge of the chart to the line of the image with a ruler. 7 Press [System Menu/Counter] or [Stop] key 8 Enter the value obtained by subtracting 20 from the value measured in step 6 in [1st side] or [2nd side] using [+], [-] or the numeric keys > [Start] key The range of the set value is as follows. Item Start Position Range -3.00 to 3.00 Default - Amount of change 0.1 mm 9 [Stop] key > [Close] [U034 Adjust Paper Timing Data] was configured. Go to next step to adjust the center position of image sensor. 10 Load A4 or Letter size paper in cassette 1 11 [Home] key > [...] > [Professional Settings] > [U755 Adjust Conveying CIS] > [01 Center Pos Adj] > [02 Print] > [Start] key The front side chart is printed. 2-7