Kyocera TASKalfa Pro 15000c Pro 15000c Advanced Operation Guide - Page 161

Finisher] > [01 Finisher] > [02 Punch Feed], Press the [Start] key > [Stop] key.

Get Kyocera TASKalfa Pro 15000c PDF manuals and user guides View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 161 highlights

Troubleshooting > Troubleshooting When Discharging Paper Remedy 2: Adjusting the stop timing of the position to open the punch hole 1 [Home] key > [...] > [Professional Settings] > [246 Adjust Finisher] > [01 Finisher] > [02 Punch Feed] 2 Adjust the setting value using [+], [-] key and numeric keypad. The range of the set value is as follows. Item Range Default Amount of change 02 Punch Feed -10 to 10 0 0.30 mm If the position of the punched hole is shorter than the specified value, increase the set value. If the position of the punched hole is longer than the specified value, lower the set value. Preset value A 9.75 mm (metric model) 0.25 inch (6.25 mm) (inch model) 3 Press the [Start] key > [Stop] key. Remedy 3: Adjust the positions of the punched holes evenly from the center 1 [Home] key > [...] > [Professional Settings] > [246 Adjust Finisher] > [01 Finisher] > [03 Punch Width] 2 Adjust the setting value using [+], [-] key and numeric keypad. The range of the set value is as follows. Item Range Default Amount of change 03 Punch Width -4 to 4 0 0.52 mm If the position of the punched hole is shorter than the specified value, increase the set value. If the position of the punched hole is longer than the specified value, lower the set value. Center line Sample 1 Sample 2 3 Press the [Start] key > [Stop] key. 4-58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
4-58
Troubleshooting > Troubleshooting When Discharging Paper
Remedy 2: Adjusting the stop timing of the position to open the punch hole
1
[Home] key > [...] > [Professional Settings] > [246 Adjust
Finisher] > [01 Finisher] > [02 Punch Feed]
2
Adjust the setting value using [+], [-] key and numeric keypad.
The range of the set value is as follows.
If the position of the punched hole is shorter than the specified value, increase the set value.
If the position of the punched hole is longer than the specified value, lower the set value.
3
Press the [Start] key > [Stop] key.
Remedy 3: Adjust the positions of the punched holes evenly from the center
1
[Home] key > [...] > [Professional Settings] > [246 Adjust
Finisher] > [01 Finisher] > [03 Punch Width]
2
Adjust the setting value using [+], [-] key and numeric keypad.
The range of the set value is as follows.
If the position of the punched hole is shorter than the specified value, increase the set value.
If the position of the punched hole is longer than the specified value, lower the set value.
3
Press the [Start] key > [Stop] key.
Item
Range
Default
Amount of change
02 Punch Feed
-10 to 10
0
0.30 mm
Item
Range
Default
Amount of change
03 Punch Width
-4 to 4
0
0.52 mm
Preset value A
9.75 mm (metric model)
0.25 inch (6.25 mm) (inch model)
Sample 1
Sample 2
Center line