Lantronix SGX 5150 User Guide - Page 109
To access System settings:, Using Web Manager, Using the CLI, Using XML, Terminal
View all Lantronix SGX 5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
9: Administration System Settings Standalone Firmware Installer Short Name Long Name Description Click Reboot to Standalone Firmware Installer to reboot the device to a standalone firmware installer mode. When the device is rebooted, your browser should be refreshed and redirected to the firmware installer page after 30 seconds. Upload and install new device firmware from that page. Enter a short name for the system name. A maximum of 32 characters are allowed. Enter a long name for the system name. A maximum of 64 characters are allowed. To access System settings: Using Web Manager To access System settings with options to set up a reboot schedule, reboot, restore factory defaults, upload new firmware, reboot the standalone firmware installer, update the system name (long or short names) or to view the current configuration, on the Administration page, click System. Using the CLI To reboot or restore factory defaults, enter the System command level: enable To setup a reboot schedule, update the system name (long or short names), enter the Device command level: enable > device Using XML Include in your file: Include in your file: Include in your file: Terminal You can configure whether each serial line or the Telnet/SSH server presents a CLI or a Login Connect menu when a connection is made. Table 9-41 Terminal on Network and Line Settings Terminal on Network and Line Settings Terminal Type Login Connect Menu Description Enter text to describe the type of terminal. The text will be sent to a host via IAC. Note: IAC means, "interpret as command." It is a way to send commands over the network such as send break or start echoing. IAC is only supported in Telnet. Select the interface to display when the user logs in. Choices are: Enabled = shows the Login Connect Menu. Disabled = shows the CLI (default) SGX 5150 IoT Device Gateway User Guide 109