Lantronix SGX 5150 User Guide - Page 65
Network Settings, SGX 5150 IoT Device Gateway User Guide, TX Key Index
View all Lantronix SGX 5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
6: Network Settings WLAN Profile Settings Passphrase TX Key Index IEEE 802.1X FAST Option FAST Provisioning EAP-TTLS Option PEAP Option Validate Certificate Description If Passphrase key type is selected, enter an alphanumeric phrase up to 63 characters in length in this field which becomes available. Spaces and special characters are allowed. Check Show Password to show the passphrase entered. If WEP security suite and Hex key type have been selected, then select the TX key index from the drop-down menu, which becomes available. For interoperability with some products that generate four identical keys from a passphrase, this index must be one. For Keys 1-4, enter one or more encryption keys in hexadecimal format. Enter 10 hexadecimal digits (0-9, a-f) for WEP40 and 26 for WEP104. For security reasons, the configured keys are not shown. If IEEE 802.1X authentication is selected, choose a particular type: LEAP: type a User Name and Password, then select an Encryption. EAP-TLS: Type a Username. EAP-TTLS PEAP: For PEAP Option, select a security protocol. FAST: If selected, select the Fast Option and Fast Provisioning options. Select the FAST option from the drop-down menu: MD5 (default) MSCHAPV2 GTC Note: This option is available when the WPA2/WPA mixed mode suite and the IEEE 802.1x authentication settings are selected. Select the FAST provisioning option from the drop-down menu: Unauthenticated Authenticated (default) Both Note: This option is available when the WPA2/WPA mixed mode suite, the FAST IEEE 802.1x authentication, and the MSCHAPV2 FAST option are selected. Select a security protocol: EAP-MSCHAPV2 MSCHAPV2 MSCHAP CHAP PAP EAP-MD5 Note: This option is available when the WPA2/WPA mixed mode suite, the IEEE 802.1x authentication, and EAP-TTLS settings are selected. Select EAP-MSCHAPV2, EAP-MD5 or EAP-TLS. Note: This option is available when the WPA2/WPA mixed mode suite, the IEEE 802.1x authentication, and PEAP settings are selected. If EAP-TLS is selected, validate the certificate installed on the device by selecting Enabled in the Validate Certificate field which appears. Validates the certificate installed on the device with the one received from the RADIUS server. SGX 5150 IoT Device Gateway User Guide 65