Lantronix SGX 5150 User Guide - Page 88
To Con Gateway Virtual IP, Using Web Manager, Using the CLI, Using XML, GRE, To Con
View all Lantronix SGX 5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
9: Administration Virtual IP Settings Delete (checkbox) Name IP Address LAN IP Address Description Check the Delete checkbox adjacent to a virtual IP address (if any listed) to be deleted, clicking the Submit button. Enter a name of the virtual IP address. Enter the virtual IP address to which the LAN IP address is to be mapped. Enter the LAN IP address to which the virtual IP address is to be mapped. To Configure Gateway Virtual IP Using Web Manager To modify gateway DHCP server information, on the Administrations page, click Gateway > Configuration > Virtual IP. Using the CLI To enter the gateway command level: enable > config > gateway Using XML Include in your file: GRE GRE tunneling is available on the SGX 5150, providing more capabilities than IP-in-IP tunneling. For example, it supports transporting multicast traffic and IPv6 through a GRE tunnel. GRE Settings Name State IP Address MTU Local Network Remote Host Remote Network Table 9-19 GRE Settings Description Enter the user-defined name of the GRE tunnel. Select to enable and disable GRE tunnel. Assign a IP address/mask for the GRE tunnel. Enter the number of bytes indicating the largest physical packet size that the network can transmit. Select the local network to use the GRE tunnel. Select vpn 1 to use the VPN network. Select any to use any available interface to remote host. Enter the remote IP address to use for the GRE tunnel. Enter the remote network to use for the GRE tunnel. To Configure Tunnel Serial Settings Using Web Manager To view or configure GRE settings for a specific tunnel, on the Administrations page, click GRE. SGX 5150 IoT Device Gateway User Guide 88